Axial Metal C-uhlobo Seal Ring Spring Metal Weatherstripping
Ingcaciso yeMveliso
Umsesane wokutywina we-axial wentsimbi ye-C ilungele ukutywinwa kwe-axial yesithuba se-cylindrical phakathi komngxuma kunye ne-shaft, umsesane wokutywina uphazamisana nomngxuma kunye ne-shaft ngokulandelelana, kwaye indlela yokuvula yohlobo lwe-C ijongene nendawo ephakathi. icala loxinzelelo.
Emva kofakelo, i-C-shaped ring ikwimeko yokuguqulwa kwe-elastic egqithisileyo, kwaye i-elasticity ye-C-shaped ring yenza ukuba ikhonkco lokutywina lihambelane ngokusondeleyo nomngxuma kunye ne-shaft;xa usebenza, uxinzelelo oluphakathi luzalisa i-cavity yangaphakathi efana ne-C, yenza umsesane wokutywina, umngxuma kunye ne-shaft ihambelana ngokusondeleyo.Tight, ukuze ufezekise itywina lokuziqinisa.Umsesane wokutywina ulungele ukutywinwa koxinzelelo oluphezulu noluphantsi kunye neentlobo ezahlukeneyo zemidiya, kwaye ingasetyenziselwa ukutywinwa okuguquguqukayo kwe-axially."
I-spring (okanye omnye umzimba o-elastiki) ifakwe kumqolo ongaphakathi omile okwe-C, onokumelana noxinzelelo oluphezulu okanye ukothuka okunamandla kunye nokungcangcazela, kwaye inokuthembeka kokutywinwa okuzinzile.
Inkcazo
| Ukutywinwa kwezinto ezikhethiweyo | I-Inconel718, izinto ezinokwenziwa ngokwezifiso | ||||||||
| Ukukhethwa kwezinto zaseNtwasahlobo | 321,304,316,InconelX-750,Inconel718,GH605,NINONIC90..Izinto ezinokwenziwa ngokwezifiso | ||||||||
| Idayamitha yecandelo * ubukhulu bodonga | Jonga itafile yokukhetha, iinkcukacha ezilungiselelweyo ziyafumaneka | ||||||||
| Iinketho zokugquma ubuso | Isilivere, ubhedu, i-nickel, okanye engafakwanga | ||||||||
I-Axial Metal C-uhlobo lweSitywina sokuKhetha iTheyibhile
| SD | RS | MT | AS | I-DSO | I-DSl | BD | SD | |||
| 9-32 | 1.6 | 0.25 | 0.35 | 1.3 | BD+0.08 | ±0.03 | SD-0.08 | ±0.03 | (-0.03,0) | (0, +0.03) |
| 32-64 | 0.25 | 0.35 | BD+0,10 | ±0.03 | SD-0.10 | ±0.03 | (-0.03,0) | (0, +0.03) | ||
| 12-32 | 2.4 | 0.25 | 0.4 | 2.05 | BD+0.08 | ±0.03 | SD-0.08 | ±0.03 | (-0.03,0) | (0, +0.03) |
| 32-76 | 0.25 | 0.4 | BD+0,10 | ±0.03 | SD-0.10 | ±0.03 | (-0.03,0) | (0, +0.03) | ||
| 19-64 | 3.2 | 0.4 | 0.5 | 2.6 | BD+0.08 | ±0.03 | SD-0.08 | ±0.03 | (-0.03,0) | (0, +0.03) |
| 64-203 | 0.4 | 0.5 | BD+0,15 | ±0.05 | SD-0.15 | ±0.05 | (-0.05,0) | (0, +0.05) | ||
| 50-152 | 4 | 0.5 | 0.65 | 3.3 | BD+0,15 | ±0.05 | SD-0.15 | ±0.05 | (-0.05,0) | (0, +0.05) |
| 152-254 | 0.5 | 0.65 | BD+0,18 | ±0.05 | SD-0.18 | ±0.05 | (-0.05,0) | (0, +0.05) | ||
| 76-152 | 4.8 | 0.5 | 0.65 | 4.1 | BD+0,18 | ±0.05 | SD-0.18 | ±0.05 | (-0.05,0) | (0, +0.05) |
| 152-254 | 0.5 | 0.65 | BD+0,20 | ±0.06 | SD-0.20 | ±0.06 | (-0.05,0) | (0, +0.05) | ||
| 102-165 | 6.4 | 0.64 | 0.8 | 5.4 | BD+0,20 | ±0.06 | SD-0.20 | ±0.06 | (-0.05,0) | (0, +0.05) |
| 165-254 | 0.64 | 0.8 | BD+0,23 | ±0.06 | SD-0.23 | ±0.06 | (-0.05,0) | (0, +0.05) | ||
| 254-400 | 0.64 | 0.8 | BD+0,26 | ±0.08 | SD-0.26 | ±0.08 | (-0.05,0) | (0, +0.05) | ||
| 400-600 | 0.64 | 0.8 | BD+0,30 | ±0.10 | SD-0.30 | ±0.10 | (-0.05,0) | (0, +0.05) | ||
