uhlobo Defferent intsimbi stainless PTFE oyile amatywina

Inkcazelo emfutshane:

Material: PTFE,Stainless Steel


Iinkcukacha zeMveliso

Iithegi zeMveliso

♠Inkcazelo-Iitywina zoMlebe we-PTFE

Metal casing PTFE Umlebe Amatywina luphawu olubonisa umlebe kwi-ID ebotshelelwa dynamically kwishaft kunye necasing yentsimbi kwiOD yayo ukucinezela-ukungena kwibhore.Ngaphandle koko, i-radial shaft itywina ngemilebe enye okanye ngaphezulu yokutywina ye-PTFE.Ukongezelela, izinto eziphathekayo ngumlomo wokutywina oqinileyo.Okona kubaluleke kakhulu, yenzelwe ukumelana nemimandla enzima ukuba izitywini ze-radial shaft eziqhelekileyo zingakwazi ukumelana, amaqondo obushushu aphezulu, uxinzelelo oluphezulu, kunye nokusebenza okomileyo.

Inzuzo

● Ukukhuhlana okuphantsi, ubomi obude bokutywina kunye noqwalaselo olufanelekileyo

● Ukuxhathisa okunamandla kwiikhemikhali

● Izantya zobuso ukuya kuthi ga kwi-10,000 spfm

● Uluhlu olubanzi lobushushu, -65 ukuya ku-450 degrees F (-53 ukuya ku-232 degrees C)

● Uxinzelelo oluphezulu olungaphezulu kwe-500 psi (i-35 bar)

● Ubomi betywina obandisiweyo kwimidiya eyomileyo okanye erhabaxa

● Ubomi beshelufu obungenamkhawulo

● Isakhono esikhulu sedayamitha

● Usetyenziso lwetywina lwe-PTFE lubandakanya iiMoto, iibhokisi zeGear, iiPumpu, kunye neeBearings.

Uhlobo Imeko ejikelezayo uMsebenzi oPhambili kunye noKwazisa
A Isantya:≤30m/sUxinzelelo:≤10bar Uhlobo A yimveliso eqhelekileyo, yongeza intambo yewotshi
(uhlobo AL)dor anticlockwise intambo (uhlobo AR) ukuphucula umsebenzi wokutywina.
ARAL
C Isantya:≤30m/sUxinzelelo:≤10bar Iyafana noHlobo A, kodwa inomlomo owongezelelweyo wokuthintela uthuli, inokufakwa kwindawo yothuli.
B Isantya:≤18m/sUxinzelelo:≤35bar Imilebe ephindwe kabini itywina ejikelezayo, ifakwe kuxinzelelo oluphezulu lwe-35bar,PV:100bar m/s, yongeza intambo yewotshi (uhlobo lwe-BL) okanye intambo ye-anticlockwise (uhlobo lwe-BR) ukuphucula ukusebenza kokutywina.
BRBL
D Isantya:≤18m/sUxinzelelo:≤35bar Iyafana nohlobo B, kodwa inomlomo owongezelelweyo wokuthintela uthuli, ingasetyenziswa kwindawo enothuli olunzima
L Isantya:≤30m/sUxinzelelo:≤1.5bar Uhlobo lokukhuhlana okuphantsi, lulungele kakhulu ukusetyenziswa kokuthwala
LB Isantya:≤30m/sUxinzelelo:≤1.5bar    Kuyafana nohlobo L, kodwa inomlomo owongezelelweyo wokuthintela uthuli, unokufakwa kwindawo enothuli olunzima.
LC Isantya:≤8m/sUxinzelelo:≤3.5bar Ukuba bhetyebhetye kuqinisiwe, kulungele ukungqubeka okungalunganga kwaye ubukhulu becala
LD Isantya:≤8m/s
Uxinzelelo:≤3.5bar
Kuyafana nohlobo lwe-LC, kodwa inomlomo owongezelelweyo wokuthintela uthuli, unokufakwa kwindawo yothuli.
LA Isantya:≤25m/sUxinzelelo:≤1.5bar Ngemilebe yokutywina elinganayo, enokwahlula ulwelo ezimbini ezahlukeneyo, njengosetyenziso lwe-centrifuge.
PTFE oyile amatywina

  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi