I-Axial Metal C-uhlobo lwe-Seal Ring Spring Metal Weatherstripping
Incazelo Yomkhiqizo
"Indandatho ye-axial yensimbi yohlobo lwe-C ilungele ukuvala uphawu lwe-axial yesikhala esiyicylindrical phakathi kwembobo ne-shaft, indandatho yokuvala iwukuphazamiseka okuhambisana nembobo kanye ne-shaft ngokulandelanayo, futhi indawo yokuvula yohlobo lwe-C ibhekene nendawo ephakathi. ingcindezi ohlangothini.
Ngemuva kokufakwa, indandatho emise okwe-C isesimweni sokuguquguquka okunwebeka ngokweqile, futhi ukunwebeka kwendandatho emise okwe-C kwenza indandatho yokuvala ilingane eduze nembobo kanye ne-shaft;lapho usebenza, ingcindezi ephakathi igcwalisa umgodi wangaphakathi omise okwe-C, okwenza indandatho yokuvala, imbobo kanye ne-shaft kufanelane kakhulu.Tight, ukuze ufinyelele uphawu lokuziqinisa.Indandatho yokuvala ifanele ukuvala ingcindezi ehlukahlukene ephezulu nephansi kanye nezinhlobo ezahlukene zemidiya, futhi ingasetshenziselwa ukubekwa uphawu okuguquguqukayo kwe-axially."
Isiphethu (noma omunye umzimba onwebekayo) sishunyekwe endaweni engaphakathi emise okuka-C, engamelana nokucindezela okuphezulu noma ukushaqeka okunamandla nokudlidliza, futhi inokwethenjelwa kokuvala okuzinzile.
Ukucaciswa
| Ukukhetha izinto ezibonakalayo | I-Inconel718, into engenziwa ngokwezifiso | ||||||||
| Ukukhethwa Kwezinto Ezisentwasahlobo | 321,304,316,InconelX-750,Inconel718,GH605,NINONIC90..Izinto ezibonakalayo | ||||||||
| Ububanzi besigaba * ukujiya kodonga | Bheka ithebula lokukhetha, imininingwane eyenziwe ngezifiso iyatholakala | ||||||||
| Izinketho zokumboza ubuso | Isiliva, ithusi, i-nickel, noma engafakwanga | ||||||||
Ithebula Lokukhetha Indandatho Yophawu Lwe-Axial Metal C
| SD | RS | MT | AS | I-DSO | I-DSl | BD | SD | |||
| 9-32 | 1.6 | 0.25 | 0.35 | 1.3 | BD+0.08 | ±0.03 | SD-0.08 | ±0.03 | (-0.03,0) | (0,+0.03) |
| 32-64 | 0.25 | 0.35 | BD+0.10 | ±0.03 | SD-0.10 | ±0.03 | (-0.03,0) | (0,+0.03) | ||
| 12-32 | 2.4 | 0.25 | 0.4 | 2.05 | BD+0.08 | ±0.03 | SD-0.08 | ±0.03 | (-0.03,0) | (0,+0.03) |
| 32-76 | 0.25 | 0.4 | BD+0.10 | ±0.03 | SD-0.10 | ±0.03 | (-0.03,0) | (0,+0.03) | ||
| 19-64 | 3.2 | 0.4 | 0.5 | 2.6 | BD+0.08 | ±0.03 | SD-0.08 | ±0.03 | (-0.03,0) | (0,+0.03) |
| 64-203 | 0.4 | 0.5 | BD+0.15 | ±0.05 | SD-0.15 | ±0.05 | (-0.05,0) | (0,+0.05) | ||
| 50-152 | 4 | 0.5 | 0.65 | 3.3 | BD+0.15 | ±0.05 | SD-0.15 | ±0.05 | (-0.05,0) | (0,+0.05) |
| 152-254 | 0.5 | 0.65 | BD+0.18 | ±0.05 | SD-0.18 | ±0.05 | (-0.05,0) | (0,+0.05) | ||
| 76-152 | 4.8 | 0.5 | 0.65 | 4.1 | BD+0.18 | ±0.05 | SD-0.18 | ±0.05 | (-0.05,0) | (0,+0.05) |
| 152-254 | 0.5 | 0.65 | BD+0.20 | ±0.06 | SD-0.20 | ±0.06 | (-0.05,0) | (0,+0.05) | ||
| 102-165 | 6.4 | 0.64 | 0.8 | 5.4 | BD+0.20 | ±0.06 | SD-0.20 | ±0.06 | (-0.05,0) | (0,+0.05) |
| 165-254 | 0.64 | 0.8 | BD+0.23 | ±0.06 | SD-0.23 | ±0.06 | (-0.05,0) | (0,+0.05) | ||
| 254-400 | 0.64 | 0.8 | BD+0.26 | ±0.08 | SD-0.26 | ±0.08 | (-0.05,0) | (0,+0.05) | ||
| 400-600 | 0.64 | 0.8 | BD+0.30 | ±0.10 | SD-0.30 | ±0.10 | (-0.05,0) | (0,+0.05) | ||
