I-DHS Wiper Seal Ukusebenzisa i-poly urethane(PU) njengempahla

I-DHS Wiper Seal Ukusebenzisa i-poly urethane(PU) njengento ebonakalayo Isithombe Esifakiwe

Incazelo emfushane:

Izinga lokushisa(℃): -35/+100

Isivinini (≤ m/s): 1

Izicelo: Imishini yezimboni, amathuluzi omshini, ama-hydraulic kanye nama-compressor emoyeni

Material: PU

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

♠Incazelo-IDU Rod Seal

I-DHS iwuphawu oluvimbela uthuli ukuthi lungangeni, luvikela izinto zokusebenza futhi lugcine ukusebenza kokuvala.Usebenzisa i-poly urethane(PU) njengento esetshenziswayo, lolu uhlobo lwesici sokuvala esingazwani nothuli somlomo wezindebe ezimbili.

I-DHS Wiper Seal ine-double lip seal enodebe oluthuli kanye ne-oil seal.Isakhiwo sayo siyenza ibe yinhle kakhulu ekumelaneni nothuli kanye nokuvuza kancane kukawoyela.Ngaphezu kwalokho, I-DH/DHS yohlobo lwe-double lip wiper ivimbela ukungena kothuli, ukungcola, isihlabathi nama-chips ensimbi.Isetshenziswa kakhulu kumasilinda namasilinda we-hydraulic, Ukunyakaza kwe-axial kwe-hoist kanye nenduku yomhlahlandlela.I-DHS Wiper Seal iwukwenza ukunyakaza kwepiston okuphindaphindekayo.

Ibanga Lohlelo

Ingcindezi[MPa]

Izinga lokushisa [℃]

Isivinini sokuslayida[m/s]

Maphakathi

Okujwayelekile

35...+100

Amafutha e-Hydraulic (asuselwa ku-mineral oil-based)

♣Inzuzo

● Ukungezwani nemithwalo yokushaqeka kanye neziqongo zengcindezi

● Ukumelana okuphezulu ngokumelene ne-extrusion

● Ukugcoba okwanele ngenxa yokucindezela phakathi kwezindebe ezivalayo

● Ifanele izimo zokusebenza ezinzima kakhulu

● Ukufakwa kalula

Okubalulekile

Idizayini Ejwayelekile			I-PU/NBR
Okukhethekile (ngesicelo)			I-FKM/NBR

Okujwayelekile kanye/noma kungalingana ne-groove
JB/ZQ 4265
GY1

Oda Isibonelo Senguqulo Ejwayelekile:

Ukucaciswa	Usayizi we-groove
	df⁸	D-0.2	S±0.1	G+03
9-14-3.5/5	9	14	11.6	4
10-15-3.8/6.4	10	15	12.6	4.3
10-20-4/8	10	20	15	4.5
11.2-19.2-4.5/6	11.2	19.2	15.5	5
12-16-3/4	12	16	14	3.5
12-17-3.2/4,2	12	17	14.6	3.7
12-18-2.5/5	12	18	15.3	3
12-18-3.6/4.8	12	18	15.3	4.1
12-18-3.8/4.8	12	18	15.3	4.3
12-18-3.8/6.4	12	18	15.3	4.3
12-18-3.9/6	12	18	15.3	4.4
12-20-4.5/6*	12	20	16.3	5
12.5-20.5-4.5/6*	12.5	20.5	16.8	S
13-20-5/6.5	13	20	16.5	6
14-22-4.5/6*	14	22	18.3	5
16-22-3.6/4.8	16	22	19.3	4.1
16-22-8/10	16	22	19.3	9
16-24-4.5/6	16	24	20.3	5
16-26-7/9.5	16	26	21	8
18-24-3.6/4.8	18	24	21.3	4.1
18-26-4.5/6*	18	26	22.3	5
18-28-4/8	18	28	23	4.5
18.5-26-3.214	18.5	26	22.8	3.7
19-27-4.5/6*	19	27	23.3	5
19.05-29.05-5.3/7	19.05	29.05	24.05	6.3
20-26-3/6	20	26	23.3	3.5
20-26-3.6/4.8	20	26	23.3	4.1
20-26-3.6/5	20	26	23.3	4.1
20-26-6/8	20	26	23.3	7
20-28-4.5/6	20	28	24.3	5

Ukucaciswa	Usayizi we-groove
Ukucaciswa	dfs	D-0.2	S±0.1	G+03
20-28-5/6.5	20	28	24.3	6
20-30-7/10	20	30	25	8
20-32-5/10	20	32	26	6
22-30-4.5/6*	22	30	26.3	5
22-33.8-2.5/3.5	22	33.8	27.9	3
22.4-30.4-4.5/6*	22.4	30.4	26.7	5
23.5-31.5-4.5/6	23.5	31.5	27.8	5
24-32-4.5/6	24	32	28.3	5
25-30-4.5/6	25	30	27.6	5
25-31-3.6/5	25	31	28.3	4.1
25-31-4/6	25	31	28.3	4.5
25-33-4.5/6	25	33	29.3	5
25-35-5.3/	25	35	29.3	6.3
25-36.8-5/8	25	36.8	31.5	6
26-34-4.5/6	26	34	30.3	5
27-35-4.5/6*	27	35	31.3	5
28-36-4.5/6*	28	36	32.3	5
28-36-47	28	36	32.3	4.5
28-39.8-4.5/6	28	39.8	34.5	5
28-40-5/10	28	40	34.5	6
29-40-4.5/6.5	29	40	35	S
30-38-4/7	30	38	34	4.5
30-38-4.5/5.8	30	38	34	5
30-38-4.5/6	30	38	34	5
30-38-5/6.5	30	38	34	6
30-40-5/6.5	30	40	35	6
31.5-39.5-5/6.5	31.5	39.5	35.5	6
31.75-41.28-5.5/7.5	31.75	41.28	36.75	6.5
32-40-4.5/5.8	32	40	36	5
32-40-5/6.5	32	40	36	6